Name | isopropyl chloroformate solution |
Synonyms | IPCF Isopropyl Chloroformate ISOPROPYL CHLOROFORMATE isopropylchloromethanoate ISOPROPYL CHLOROCARBONATE Isopropyl chlorocarbonate propan-2-yl carbonochloridate chloro-formicaciisopropylester isopropylchloroformatesolution isopropyl chloroformate solution chlorocarbonicacidisopropylester isopropylesterkyselinychlormravenci Carbonochloridic acid 1-methylethyl ester |
CAS | 108-23-6 |
EINECS | 203-563-2 |
InChI | InChI=1/C4H7ClO2/c1-3(2)7-4(5)6/h3H,1-2H3 |
InChIKey | IVRIRQXJSNCSPQ-UHFFFAOYSA-N |
Molecular Formula | C4H7ClO2 |
Molar Mass | 122.55 |
Density | 0.892g/mLat 25°C |
Boling Point | 105 °C |
Flash Point | 43°F |
Vapor Presure | 27.998hPa at 20℃ |
Appearance | Notspecified |
BRN | 506416 |
Storage Condition | 2-8°C |
Refractive Index | n20/D 1.485(lit.) |
Physical and Chemical Properties | Density 0.892 (1.0 M in toluene) refractive index 1.485 flash point 43 °F |
Use | It can be used as an initiator in the polymerization of polyvinyl chloride resin, and can also be used as a pesticide intermediate, ore flotation agent, etc. |
Risk Codes | R11 - Highly Flammable R34 - Causes burns R48/20 - R63 - Possible risk of harm to the unborn child R65 - Harmful: May cause lung damage if swallowed R67 - Vapors may cause drowsiness and dizziness R43 - May cause sensitization by skin contact R26 - Very Toxic by inhalation |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S62 - If swallowed, do not induce vomitting; seek medical advice immediately and show this container or label. S28 - After contact with skin, wash immediately with plenty of soap-suds. S16 - Keep away from sources of ignition. |
UN IDs | UN 3286 3/PG 2 |
WGK Germany | 2 |
RTECS | LQ6475000 |
FLUKA BRAND F CODES | 10-19 |
HS Code | 29159000 |
Hazard Class | 6.1(a) |
Packing Group | I |
colorless transparent liquid. Boiling point of 104.6~104.9 deg C (101. 46kPa). Refractive index (1. 4013. Soluble in ether, insoluble in water.
isopropyl alcohol and phosgene reaction synthesis, and then by flooding, distillation, refined to the finished product.
It is used as an intermediate for agricultural chemicals, as an ore flotation agent and as an initiator for radical polymerization, such as initiation of polymerization of vinyl chloride.
EPA chemical substance information | information provided by: ofmpeb.epa.gov (external link) |
Use | isopropyl chloroformate is an intermediate of the fungicide ebb. used as a pesticide intermediate, ore flotation agent and initiator for radical polymerization, such as initiation of vinyl chloride polymerization. it can be used as an initiator in the polymerization of polyvinyl chloride resin, and can also be used as a pesticide intermediate, ore flotation agent, etc. |
production method | Isopropyl alcohol is synthesized by reaction with phosgene, and then the product is refined by gas displacement and distillation. The preparation method is to add isopropyl alcohol in the phosgene transfer kettle, start stirring, and then pass the phosgene through the phosgene flow meter, the phosgene temperature is about 30 ℃, continue to pass the phosgene for several hours, close to the end point, after the sampling and analysis are up to standard, the ventilation is stopped, then the phosgene and hydrogen chloride are driven away by nitrogen, and the phosgene is destroyed, and the product is sampled and analyzed. Reaction equation:(CH3)2CHOH COCl2 → ClCOOCH(CH3)2 HCl |
category | toxic substances |
toxicity grade | high toxicity |
Acute toxicity | oral-rat LD50:1070 mg/kg; Oral-mouse LD50: 178 mg/kg |
flammability hazard characteristics | open flame flammable; High heat releases toxic chloride gas |
storage and transportation characteristics | The warehouse is ventilated and dried at low temperature; It is stored separately from oxidants and food additives |
extinguishing agent | dry powder, foam, carbon dioxide, sand |
Occupational Standard | TWA 1 PPM (5 mg/m3); sel 0.1 mg/m3 |
toxic substance data | information provided by: pubchem.ncbi.nlm.nih.gov (external link) |